Briggs & Stratton 400E Instrucciones de operaciones descargar pdf (Pagina 47)

agria Multi-Purpose Machine 400E/400K 47

Air Filter

Version 5 HP engine

Clean air filter insert after every

3 months or after every 25 operating

hours at the latest (in case of heavy dust

occurence earlier). For this purpose,

proceed as follows:

l

Loosen screws and remove filter

housing cap.

l

Remove foamed preliminary filter

from cap and wash in non-foaming,

warm suds. Do not use paraffine con-

taining detergents (petrol etc.). Rinse

preliminary filter inside out in running

water, rinse until water stays clear.

l

Let insert air-dry completely, before

you insert it again.

l

Slightly soak foamed preliminary fil-

ter with engine oil, squeeze oil out well

(wrap in a cloth and press) to prevent

the dry filter element from becoming wet

due to excess oil.

l

Tap dry filter element, do not blow

clean with compressed air. Do not treat

with oil.

l

Clean dry filter element after every

100 operating hours or after heavy soil-

ing.

Version Power Built engine

see separate Briggs & Stratton engine

operating instructions

5. Maintenance

Fuel System

l

Each time you maintain the machine,

check fuel hose, fuel tank, and

carburetor for leakages. Repair, if nec-

essary, immediately replace leaking or

porose fuel hose.

l

Replace fuel hoses after every 2

years.

l

If engine fuel supply is too high, move

speed control lever to full throttle/Vollgas

and crank engine with recoil starter un-

til engine starts.

Do not crank engine when spark plug is

removed.

T

5

2 fastening

screws

Filter housing cap

Foamed

preliminary filter

(Wire meshed

bottom)

Dry filter element

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 67 68

Comentarios a estos manuales

Sin comentarios