Briggs & Stratton 400E Instrucciones de operaciones descargar pdf (Pagina 52)

52 agria Multi-Purpose Machine 400E/400K

Only operate attachments

with all guards in place.

Do not use conventional V-belts but

only agria special belts.

Adjusting V-Belt Tension

Tension of V-belt requires re-adjust-

ment, when the hand clutch lever play

is less than 1.5 mm with forward

speed engaged.

Remove pulley and belt guard (F/8

or H/8). For this purpose, unscrew lock

nuts (F/10 or H/10).

Remove V-belt guide plate (F/7 or

H/7).

Move hand clutch lever (E/4 or G/4)

to neutral/Leerlauf (pawl (E/5 or G/5) is

locked).

Screw V-belt pulley and rubber pul-

ley “II” into wall until V-belt tension is

normal for reverse speed.

Prepare rubber pulley “II” for reverse

speed by adjusting the Bowden cable

in the hand clutch lever (fig. X) in such a

way that the space between the outside

diameter of pulley “I” and the outside

diameter of rubber pulley “II” is 5 mm

(fig. Y).

Engage hand clutch lever for forward

speed.

Turn idler pulley “III” into arrow direc-

tion, until play in hand clutch lever (in

forward position) is 2.5–4 mm.

Replace V-belt guide (F/7 or H/7) (see

fig. F or H).

Mount pulley and belt guard (F/8 or

H/8). For this purpose, the clutch lever

must be in position “forward”.

5. Maintenance

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 67 68

Sin comentarios

Briggs & Stratton 400E Instrucciones de operaciones Pagina 52