Briggs & Stratton 252700 Especificaciones Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 52
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
3
DIODE CHECKS
In the Diode Test position, the meter will display
the forward voltage drop across the diode(s). If
the voltage drop is less than 0.7 volt, the meter will
“beep” once, as well as display the voltage drop. A
continuous tone indicates continuity (shorted diode).
An incomplete circuit (open diode) will be displayed
as “OL”.
1. Insert RED test lead into v
receptacle in
meter.
2. Insert BLACK test lead into
COM
receptacle in
meter.
3. Rotate selector to
position.
4. Attach RED test lead to point “A” and BLACK test
lead to point “B”. (It may be necessary to pierce
wire with a pin as shown.)
a. If meter “beeps” once, diode is OK.
b. If meter makes a continuous tone, diode is
defective (shorted).
c. If meter displays “OL”, proceed to step 5.
5. Reverse test leads.
a. If meter “beeps” once, diode is installed
backwards.
b. If meter still displays “OL”, diode is defective
(open).
Dual Circuit – Charging Unit
3 Amp DC
TEST
LEAD FROM
METER
TEST
LEAD FROM
METER
WIRE
FROM STATOR
CONNECTOR
DIODE
A
B
A
B
WIRE
FROM STATOR
DIODE
TEST
LEAD FROM
METER
CONNECTOR
“BUMP” ON
CONNECTOR
INDICATES
DIODE SIDE
TEST
LEAD FROM
METER
Tri-Circuit – Lighting CircuitTri-Circuit – Charging Circuit
A
B
DIODE
TEST
LEAD FROM
METER
TEST
LEAD FROM
METER
WIRE
FOR LIGHTING
CIRCUIT
TEST
LEAD FROM
METER
DIODE
A
WIRE
FOR CHARGING
CIRCUIT
TEST
LEAD FROM
METER
B
another free manual from www.searstractormanuals.com
Vista de pagina 4
1 2 3 4 5 6 7 8 9 10 ... 51 52

Comentarios a estos manuales

Sin comentarios